|
Products
|
|
|
|
|
The "MO" spindle speeders series have been designed and developed
to offer a product that ensures maximum reliability and precision in milling
and drilling operations. From the design to the static and dynamic testing
of the finished product, our spindle speeders series utilize the most
advanced technical and technological know-how.
- Max.
continuous rpm 18,000 (higher ratings on request)
- Used
particularly in finishing operations
- Possibility
of manual or automatic mounting
- Allow
the machine to rotate at low rpm
- Possibility
of using hard metal tools
|
 |
The
compact construction, the heat-treated steel part and the ground gears
on the involute guarantee the transmission of high power ratings with
amazingly low noise levels. The spindle is supported by a set of two
and three preloaded precision ball bearings with oblique contact that
ensure stiffness and rotation precision within 0.01 mm.
|
|
|
|
- Cone
solidly connected with the spindle seat
- Two
or three planetary gears for high transmission power ratings
- Special
tool attachment, on request (Komet, DIN 1835, etc.)
- Liquid
coolant fed through tool center, on request
- Special
machine attachment, on request (HSK, Morse Cone, Din 69880, etc.)
- Interchangeable
anti-rotational pin which therefore can be customized by the buyer
|
|
The
spindle speeders series can be mounted on additional machines and
on machines with an automatic tool changer. In the latter case an
anti-rotation unit will be supplied that can turn 360°. The spindle
speeders series is lubricated with a long-life synthetic grease that
is practically maintenance free. The testing certificate attached
to each spindle speeders series guarantees the quality of the product.
Our products have always been recognized by their strength, versatility
and easy use and maintenance and the spindle speeders series are traditional
proof of such outstanding features.
|
|
|
Each
spindle speeder has its own test certificate which includes the technical
characteristics, the serial number, the results of the tests made
on our BP01 testing table, and the concentricity value between the
shank and the collet. (max. value 0.01mm / 0.0004") To verify the concentricity
value it is necessary to have the spindle speeder stopping the pin
and rotating the shank. The value on the mm omparator is the concentricity
between the axis of the shank and the axis of the spindle. |
|
|
Top
of Page | Contact
Us | Catalog Request
Techleader
Tooling, Inc.
3606 California Road, PO Box 957
Orchard Park, NY 14127
Toll Free: 800-688-6810 - Tel: 716-662-6818 - Fax: 716-662-8965
©1998-2000 Techleader Tooling, Inc. All rights reserved.
|
| |
|
®
