Techleader - Collets Chucks

Precision and Efficiency
The time for experimenting is finally over: With Centro P we are offering a Precision Collet Chuck for the Standard range, which continues the tradition of our tried and tested Collets in terms of precision and quality. Rely on FAHRION for your Collet Chucks – the only way to bring the precision of the Collet to your cutting tool.

Centro P - the best the market has to offer
Use your FAHRION Collets with the innovative Centro P Collet Chucks to achieve perfect results. With Centro P we are revolutionising Collet Chuck and Collet clamping technology, putting it ahead of the competition in respect of precision, clamping force, flexibility and price-performance.
Don't waste your money on laborious and costly hydraulic, expansion or shrink fit clamping techniques.

Centro P - Precision of your choice
Combine Centro P with FAHRION GER-HP Collets for system accuracy of <= 3 µm*,
when combined with our GER-B Collets you achieve a system accuracy <= 6 µm*
*checked at the cutting tool at a distance of 3 x D (max. 50 mm)

Profitability through precision
Extremely high concentricity and repeatability
> reduced production tolerances
> reduces finishing to a minimum
> reduced cycle times
> protects the tools
You save money!

Profitability and efficiency through quality and innovation
Excellent material and machining quality, along with advanced technology
> increase flexibility
> improve clamping force
> increase tool life
> maximise clamping and production safety
> guarantee high availability
> ensure high productivity
Get ahead of your competitors!

Accurate
constant system accuracy with FAHRION GER-HP Collets <= 3 µm*,
<= 6 µm* with the FAHRION GER-B Collets
*checked at the cutting tool at a distance of 3 x D (max. 50 mm)

Vibration
possible vibration during the application are absorbed by the Collets

Unmistakable
due to the unique design of the FAHRION HPC Clamping Nut with trapezoidal thread and double-length guide Centro P is ideal for High Performance Cutting

Low cost
FAHRION Precision Collets to DIN6499/ISO15488-B (ER/ESX) or DIN6388/ISO10897 (OZ): the low-cost alternative to other precision systems such as expansion chucks with cylindrical sleeves or shrink fit chucks

Universal
ideal for drilling, countersinking, reaming, milling, HPC/HSC and tapping

Temperature Stability
Suitable for dry processes and hard milling up to 200°. Resistant to temperature changes

Maintenance free
You don't have to check the clamping force, provided the Collet diameter is the same as the tool shaft and you comply with the operating instructions. Full clamping force is maintained, even when in storage for a long time

The Precision Collet Chucks Centro P are available in three executions:

GER* Precision Collet Chuck for Collets to DIN6499/ISO15488-B (ER/ESX) -
very high system accuracies of <= 3 µm with FAHRION Collets GER-HP resp. <= 6 µm with FAHRION Collets GER-B

OZ Precision Collet Chuck for Collets to DIN6388/ISO10897 (OZ) -
extremely stable for rough milling with clamping forces of more than 600 Nm at CP432

GER-GB* Sync-Tap Tapping Chuck (rigid) for Collets to DIN6499/ISO15488-A -
for synchronised tapping with especially for taps drafted Tap Collets GER-GB with internal square drive